Marine Sanders

MODEL FB-8 SERIES

3/16" orbit, 6,000 RPM 5.5 lbs. 1/4NPT 75PSI 11CFM 2-3/4" X 16" pad
The FB-8 file board delivers a powerful orbital stroke for rapid material knock-down. Its two point positive thrust support assures full application of power from the motor to the sanding surface. Operator control is assured through convenient grip for second hand, as well as superb counter-balancing for minimal vibration.
APPLICATIONS * Leveling * Sanding body filler * Blending

AVAILABLE PADS: 2-3/4″ X 16″


MODEL XLB SERIES

15/32" orbit, 10,000 RPM 3.3 lbs. 1/4NPT 90PSI 13CFM 3,5 0r 6" pad
The Model XLB’s light weight and long stroke let you buff at higher speeds…without swirls! It’s available with a 3”, 5”, or 6” hook and loop pad, and with optional changeable counterweights can be easily field-converted to any of these pad diameters. The XLB features a high torque air motor with integral speed control, plus low noise and vibration levels and soft cushion grip handles for exceptionally smooth operation. The XLB is also excellent for sanding. With its nearly ½” stroke and double head bearing, it removes stock faster than any other dual action random orbital sander.
APPLICATIONS * Buffing * Polishing * Sanding * Aggressive stock removal * Shaping

MODEL DAQ SERIES

3/8" orbit, 10,000 RPM 4.1 lbs. 1/4NPT 60PSI 13CFM 4,5,or 6" pad
This is the original version of the most copied air sander in the world. The Model DAQ has a unique drive geometry that results in an aggressive interrupted contact of the abrasive to the work surface. Since the pad is always changing plane, the abrasive does not load up & heat. The DAQ-6 meets all current OSHA noise level requirements. Features a variable speed control lever. This is a high quality professional tool from one of the most respected names in the industry, National Detroit. You will not find an air sander of this quality at Home Depot.
APPLICATIONS *Sanding filler/primer, *Smoothing welds, * Removing old paint, rust & scale, *Burring, beveling, corner breaking, *Shaping & forming filler, wood & fiberglass, *Removing flash, *Feather edging
 

MODEL EZLS SERIES

3/8" orbit, 10,000 RPM 3.2 lbs. 1/4NPT 60PSI 13CFM 3,4,5,or 6" pad
Faster cutting to a fine finish characterizes the EZLS. It has the same smooth and simple operation of the EZQ combined with a longer 3/8” stroke. The EZLS also features superb ergonomics with its soft foam grip and lighter weight at only 3 lbs. 4 oz. Also available in dust extraction model EZLS-DE, which uses any standard 5/16-24 studded DE pad.
APPLICATIONS * Sanding * Cutting * Shaping * Forming * Fine finishing * Spot repairs

MODEL EZQ SERIES

The EZQ combines the performance of Dual Action sanding with design features that make it exceptionally smooth and simple to operate. Since the pad operates flat on the work surface, the EZQ is smooth enough to eliminate hand sanding even on thin unsupported metal or plastic. With its lighter weight and smooth operation, the EZQ is easy to master while providing the power and flexibility you need. It works exceptionally well with today’s micro-fine abrasives. The EZQ-DE offers through-the-pad/through-the-handle dust extraction that is the ultimate in convenience. The EZQ-DE uses female thread pads. It is also available for use with standard 5/16-24 studded pads. An accessory T-handle motor cover is also available.
APPLICATIONS * Fine finishing * Sand drop coats * Primer or base coats * Clear coat repair * Feather coats
 

MODEL PGU SERIES

3/15" orbit, 12,000 RPM 2.1 lbs. 1/4NPT 90PSI 11CFM 3, 5 or 6" pad
  • Includes your choice of 3″, 5″, 6″
  • Vinyl or Hook & Loop pad (works inter-changeably with all 3.
  • 3/16″ orbit ideal for general sanding needs.
  • Lightweight, just 2 lb.
  • Comfortable rubber grip
  • Powerful 12,000 rpm motor.
  • Made with a rugged National Detroit drive system.
  • Adjustable speed control.
GENERAL SANDING
APPLICATIONS * Removal orange peel * Clear coat sanding * General sanding * Polishing * Sanding filler * Block sanding

MODEL HD-8 SERIES

3/16" orbit, 10,000 RPM 3.9 lbs. 1/4NPT 60PSI 11CFM 8" pad
The National Detroit HD-8 is a random orbit, dual-action sander with an 8” Sanding pad. The HB-8 is designed with a five point pad attachment to keep the pad flat for optimum sanding. Since there is no center spindle to bend, the pad is maintained in a rigid, flat position, which reduces vibration, provides for even sanding, reduces operator fatigue, and improves quality. No matter how much pressure is placed on the HD-8, the double row orbital bearing will keep the pad on a true path. FEATURES INCLUDE: • 8” Pad, available in Hook & Loop, Vinyl or Canvas face • Rigid construction • Foam grips on both the handle and the T-Handle for additional operator comfort • Double row orbit bearing for long life • 5 point pad attachment • Lightweight
APPLICATIONS * Fine finishing * Sand drop coats * Primer or base coats * Clear coat repair * Feather coats
 

MODEL PG-8 SERIES

3/16" orbit, 8,000 RPM 3.1 lbs. 1/4NPT 90PSI 12CFM
The Model PG-8 incorporates the comfortable, lightweight Palm design with an 8 inch pad traditionally seen on 2-handed tools. One handed sanding allows for better control for flat sanding and helps eliminate sanding ‘scallops’ on wood & fiberglass due to uneven pressure applied to the tool.

MODEL PGSS SERIES

3/32" orbit, 12,000 RPM 2.1 lbs. 1/4NPT 90PSI 11CFM 3, 5 or 6" pad
  • Includes your choice of 3″,5″, 6″.
  • Vinyl or Hook & Loop pad (works inter-changeably with all 3.
  • 3/16″ orbit ideal for fine sanding or clear coat, laquers, etc.
  • Lightweight, just 2 lbs.
  • Comfortable rubber grip
  • Powerful 12,000 rpm motor.
  • Made with a rugged National Detroit drive system.
  • Adjustable speed control.
FINE FINISHING
APPLICATIONS * Finish sanding * Sanding filler * Block sanding * Clear coat sanding * Removal orange peel

MODEL 900 SERIES

3/16" orbit, 9,000 RPM 4.75 lbs. 1/4NPT 80PSI 14CFM 8" pad
The original, often imitated, ‘mud hog’ sander. 8″ gear driven pad. Fast, controllable stock removal. Great for leveling & spotting high & low spots. Optional T-Handle motor cover available.
APPLICATIONS *Stripping *Stock removal *Leveling *Paint removal *Sanding body filler *Shaping

MODEL 9600 SERIES

3/16" orbit, 9,000 RPM 4.5 lbs. 1/4NPT 80PSI 14CFM 5"or 6" pad
Smaller version of the 8" 'mud hog' sander. Operates with either a 5" or 6" pad. Aggressive enough for knock down, yet enough finesse for feather edging. Available in a 6" Dust Extraction model. Optional T-Handle motor cover available.
APPLICATIONS * Sanding body filler * Paint removal * Feather edging * Shaping * Buffing & polishing

MODEL 9900 SERIES

7/16" orbit, 9,000 RPM 5.0 lbs. 1/4NPT 80PSI 14CFM 6" pad
• Excels at buffing & sanding! • 6″ gear driven rotating/oscillating pad. • Strips to bare metal 3 times faster than other sanders. • Buffs clear coat repairs in half the time of an electric buffer. • Generates less heat, prolonging abrasive life when sanding.
APPLICATIONS *Sanding body filler *Paint removal *Feather edging *Shaping *Buffing & polishing *Orange peel removal

Leave a Reply

Your email address will not be published. Required fields are marked *